Industrial DIN Rail Power Supplies(480W Single Output)
- High efficiency (89%),low dissipation - Built-in passive PFC function compliance to EN61000-3-2 - Protections: Short circuit/ Over load/ Over voltage/Over temperature - Cooling by free air convection - Built-in constant current limiting circuit - Can be installed on DIN rail TS-35/7.5 or 15 - LED indicator for power on - 100% full load burn-in test - EN61000-6-2(EN50082-2) industrial immunity level - 3 years warranty - Dimensions: 227*125.2*100mm (W*H*D)
Model
HDR-480-24
HDR-480-48
Output
DC Voltage
24V
48V
Voltage Tolerance
+1%
+1%
Rated Current
20A
10A
Current Range
0-20A
0-10A
Rated Power
480W
480W
Ripple & Noise
120mVp-p
120mVp-p
DC Adjustment Range
24-48V
48-53V
Setup, Rise, Hold Time
1200ms,40ms/230VAC at full load
Hold Time
16ms/230VAC
Input
Voltage Range
180~264VAC47～63 Hz;250～370VDC
AC Current
4A/ 230 V
Efficiency
89%
Inrush Current
Cold start40A/230V
Leakage Current
＜3.5mA/240VAC
Protection
Over Load
105%～150%
Protection type: Constant current limiting, recovers automaticallyafter fault condition is removed
Over Voltage
30-36V
54-60V
Protection type: Shut down o/p voltage, re-power on to recover
OVER TEMP.
100℃+5℃(TSW)
Protection type: Shut down o/p voltage, recovers automatically after temperature goes down
Environment
Working Temp & Humidity
-20℃～+70℃;20%～90 %RH
Storage Temp &Humidity
-20℃～+85℃;10%～95 %RH
Vibration
10～500Hz,2G 10min./1cycle, period for 60min,each along X, Y, Z axes
