Welcome to Greegoo, Your Satisfaction, our Pursuit!
Contact Us  |  Site Map
Professional Manufacturer and Exporter of power supplies, sensors, control and protection electrics, switchgears and fittings.
Home -> Products -> Product Center -> Automation Electrics -> Din-rail SMPS -> Industrial DIN Rail Power Supply(240W Single Output)
Product Center
 
Industrial DIN Rail Power Supply(240W Single Output)
Print this pagePrint this page
Bookmark this pageBookmark this page
Tell a friendTell a friend
Live MessengerLive Messenger
Skype MeSkype Me
E-mail UsE-mail Us
Consulting Product InformationConsulting Product Information
Industrial DIN Rail Power Supply(240W Single Output)

- Universal AC input/ full range
- Built-in active PFC function
- Protections: Short circuit/ Over load/ Over voltage/Over temperature
- Cooling by free air convection
- Can be installed on DIN rail TS-35/7.5 or 15
- LED indicator for power on
- 100% full load burn-in test
- Fixed switching frequency at 100KHz
- 3 years warranty
- Dimentsions: 125.5*125.2*100mm (W*H*D)

Model HDR-240-24 HDR-240-48
Output DC Voltage 24V 48V
Voltage Tolerance +1% +1%
Rated Current 10A 5A
Current Range 0-10A 0-5A
Rated Power 240W 240W
Ripple & Noise 80mVp-p 150mVp-p
DC Adjustment Range 24-48V 48-53V
Setup, Rise, Hold Time 800ms,40ms/230VAC at full load800ms,40ms/115VA Cat full load
Hold Time 24ms/230VAC24ms/115VAC at full load
Input Voltage Range 88~264VAC47~63 Hz; selected by switch 120~370VDC
AC Current 2.8A/115 V 1.4A/ 230V
Efficiency 84% 85%
Inrush Current Cold start 27A/115V 45A/230V
Leakage Current <3.5mA/240VAC
Protection Over Load 105%~150%
Protection type: Constant current limiting, recovers automatically after fault condition is removed
Over Voltage 30-36V 54-60V
Protection type: Shut down o/p voltage, re-power on to recover
OVER TEMP. 100℃+5℃
Protection type: Shut down o/p voltage, recovers automatically after temperature goes down
Environment Working Temp & Humidity -10℃~+70℃;20%~90 %RH
Storage Temp &Humidity -20℃~+85℃;10%~95 %RH
Vibration 10~500Hz,2G 10min./1cycle, period for 60min,each along X, Y, Z axes
Safety Withstand Voltage I/P-O/P: 3KVAC I/P-FG: 1.5KVAC O/P-FG: 0.5KVAC
Isolation Resistance I/P-O/P, I/P-FG, O/P-FG: 100MΩ / 500VDC
Standards Safety Standard Design refer to UL508,UL60950-1,TUV EN60950-1
EMC Standard Design refer to EN55011,EN55022,EN61000-3-2,-3, EN61000-4-2, 3, 4, 5, 6, 8, 11, ENV50204,EN55024,EN61000-6-2
Others Weight 1.2Kg
Packing 12pcs/15.5Kg/1.2CUFT
 

                  


Power Semiconductors
Automation Electrics
Circuit Breakers
Control & Protection Electrics
LED Lighting
Relays
Interface Components
Switches and Switchgears


Home | Site Map | Switches and Switchgears | Interface Components | Relays | LED Lighting | Control & Protection Electrics
Recommend Products: Residual Current Operated Breaker (CB,Semko CE approval) | GVTA series three phase AC switching module (50A to 500A) | Phase control thyristor upto 6500V for SVC and high voltage soft starter | Integrated high-power energy-saving lamps, 125W & 145W. | LED Street Light (56W, IP65, Rectangular Beam)

Copyright 2007 Greegoo All Right Reserved