Direct mounting : under the contactor for versions with screw clamp terminals only; pre-wired terminals, see below.Separate mounting : using terminal block LA7-K0064 (see below).On the front of the overload relay
■ Selection of reset mode : Manual (marked H) or Automatic (marked A) ■ Red pushbutton : Trip Test function ■ Red pushbutton : Trip reset ■ Blue pushbutton : Stop and manual Reset ■ Yellow trip flag indicator : overload relay tripped ■ Protection by fuses or by magnetic circuit-breaker type GV2-L, see page 1/92.
Technical parameter
Relay setting range (A)
Fuses to be used with selected relay Type (A)
Reference
Weight (kg)
aM
gM (BS88)
Class 10 A (the standard specifies a tripping time of between 2 and 10 seconds at 7.2 In)
