News

A margin should be left when selecting the voltage and current of the solid state relay.

For resistive load: the current is selected according to 2.5~4 times the load current, and the voltage is selected according to 2~2.5 times the load power. Inductive load: current is selected according to 3-7 times load current, voltage is selected according to 2.5-3 times load voltage.

According to the relationship between load current and ambient temperature, when the ambient temperature is high or heat dissipation conditions are not good, the current capacity of the solid state relay should be increased accordingly.
In order to prevent the product from short-circuiting during use, it is necessary to connect a fast circuit breaker or a fast fuse in series with the product in the load circuit.

For inductive loads, a freewheeling diode must be connected to both ends of the load, and a varistor must be connected to the output end (the varistor (MOV) is selected according to 1~1.5 times of the power supply voltage) to prevent the high voltage generated during switching from damaging the solid-state switch.

When the product is installed, it is required that the contact surface between the heatsink and the product must be flat and clean, and a layer of thermally conductive silicone grease is applied to its surface, and then finally the screws set with flat washers and Spring washersare tightened symmetrically to fix.

Choosing between single-phase and three-phase thyristor power controllers depends on load power, grid conditions, and application needs. Single-phase controllers suit small loads (<10kW, 220V AC), like lab heaters, offering simple wiring and lower costs. Three-phase controllers handle larger loads (>10kW, 380V AC), such as industrial ovens, providing higher precision (±1°C) and better grid stability. Consider load type: single-phase for basic resistive loads, three-phase for high-power or inductive loads. Assess grid compatibility and budget—single-phase is cheaper, while three-phase ensures durability and scalability. Always include a 20% power margin and verify grid stability.

Phase-angle control and zero-cross control are two methods used by SCR power controllers to regulate power. Phase-angle control adjusts the SCR conduction angle within each AC cycle, enabling precise, smooth power variation, ideal for applications like precise heating. Zero-cross control activates SCRs only at the AC waveform’s zero-crossing point, fully on or off, minimizing electromagnetic interference, suitable for on/off loads like thermostats. Phase-angle control offers flexibility but may generate harmonics, while zero-cross control is simpler, with lower noise but less precision. The choice depends on the application’s need for accuracy versus noise reduction.

A SCR power controller regulates electrical power to a load using Silicon Controlled Rectifiers (SCRs). It works by controlling the timing of SCR conduction in each AC cycle. In phase-angle control, it adjusts the conduction angle to smoothly vary power output, ideal for precise heating. In zero-cross control, it switches SCRs at the AC zero point to minimize noise, suitable for on/off loads. The controller receives input signals (e.g., 4-20 mA or 0-10 V) from PLCs or sensors to set power levels. This ensures efficient, reliable power management for industrial applications like heaters, furnaces, or motors.

A SCR power controller is an electronic device that uses Silicon Controlled Rectifiers (SCRs) to precisely regulate power delivered to electrical loads, commonly in industrial settings. By modulating the conduction angle of SCRs, it controls voltage and current, enabling accurate power management. Operating via phase-angle control or zero-cross switching, it suits applications like industrial heating, plastic molding, or metal treatment. SCR controllers offer high efficiency, reliability, and precise temperature control, accepting inputs like 4-20 mA or 0-10 V from PLCs. They reduce wear compared to mechanical relays, ensuring consistent performance in demanding environments like furnaces or HVAC systems.

Vacuum contactors are electrical switching devices used to control low and medium voltage circuits, typically in the range of 1.14kV to 40.5kV. They operate by using a vacuum interrupter to extinguish the arc formed when electrical contacts open or close, ensuring reliable switching with minimal wear. The vacuum environment prevents oxidation and contamination of the contacts, making them durable and suitable for frequent operations.

TRIAC Output SSR: Simple, cost-effective, and suitable for low to medium power AC load switching applications, particularly in consumer or light industrial settings. Limitations include lower performance and durability under high current/voltage and inability to regulate current.

SCR Output SSR: Uses dual SCRs, designed for high-power, high-voltage, and heavy-load applications with better thermal management, higher reliability, and longer lifespan. Supports both zero-crossing and random switching modes, and can regulate current, making it ideal for industrial applications but at a higher cost.

The GHFVC-160A/5kV and GVC5-160A/1.14KV vacuum contactor series vacuum contactors differ significantly. GHFVC, rated at 5kV and 400Hz, is tailored for rail transit with robust environmental resilience (-35°C to 55°C, vibration, tilt ±30°), a permanent magnet latching (≤600W), and 300,000 mechanical cycles. GVC5, rated at 1.14kV and 50/60Hz, serves industrial motor control with an electrical latch (≤800W), 100,000–300,000 cycles. GHFVC excels in high-voltage rail applications, while GVC5 is cost-effective for general industrial use, with lower voltage and simpler design.

While direct credit card payments are not accepted, we recommend using PayPal, which allows you to pay securely with your credit card.

Greegoo Electric’s products serve industrial automation, power electronics, renewable energy, power distribution, building control, and welding. Applications include inverter systems for solar energy and electric vehicles, motor drives, induction heating, and energy storage. The vacuum contactors and high-voltage switchgears ensure dependable power distribution in industrial grids. Power semiconductors and rectifiers are used in welding machines, battery charging, and brushless generators, delivering reliable performance across diverse industrial and commercial applications in over 50 countries.

A freewheeling diode, also known as a flyback diode, is connected in parallel with an inductive load (e.g., motor, inductor, or transformer) in electronic circuits to provide a path for the current when the switching device (e.g., transistor, IGBT, or thyristor) turns off. This prevents voltage spikes caused by the inductive load’s stored energy, protecting the circuit and reducing electromagnetic interference (EMI).

A bridge rectifier is an electronic component used to convert alternating current (AC) to direct current (DC). It consists of four diodes that conduct current during both the positive and negative half-cycles of AC, thus outputting unidirectional DC. During operation, current flows through two diodes in the positive half-cycle and through the other two diodes in the negative half-cycle, ensuring the current always flows in one direction. Bridge rectifiers are widely used in power adapters, chargers, and various electronic devices to provide a stable power supply for devices requiring DC. Its simple design and high efficiency make it an essential component in power electronics.